[SOLVED] Coe328 lab 3 – adder and subtractor unit
5.0
1 customer review
Digital download
Digital download
$25.00
- Availability
- In stock
- Checkout
- One item
Need a hand?
Message us on WhatsApp for payment or download support.
• To design and build a 4-bit Adder/Subtractor unit (ASU) using an Altera CPLD chip.
• To design the Adder/Subtractor unit that multiplexes add and subtract operations with a common Cin input.
• To implement the 4-bit ASU using VHDL coding.
• To design a Combinational Circuit that takes the decoded output of ASU as input. This Combinational Circuit will have the design logic to output individual digits of the Student
Identification number of the student performing laboratory work. Pre-Lab Preparation
2
1. Modify the VHDL code from Figure 5.28 (see course text) to implement the ASU represented in Figure 5.13 (see course textbook). Create a file ASU.vhd to accomplish this task. Note: change ieee.std_logic_signed.all to ieee.std_logic_unsigned.all.
2. Copy the code that implements a 4 bit-to-7-segment converter from Figure 6.47 (course textbook) into a file sseg.vhd.
3. Modify the code in file sseg.vhd to represent the sequence 0-F on a seven segment display. It must also be able to show the sign ( – ) in case of negative numbers.
4. Minimize the logic expressions for your customized L3, L2, L1 and L0 -signals. These minimized logic expressions are to be implemented as outputs of the combinational circuit C in Figure 2 (shown below).
5. Create a new VHDL file C.vhd to implement the minimized logic expressions for the L3, L2, L1 and L0 signals that correspond to a 4-bit representation of your student identification number. The minimized logic expressions for these signals can be generated using K-Maps and converting each of the resulting expressions to VHDL code.
6. Using the Functional Simulator (waveforms), verify the circuit described by the VHDL file obtained in step 3. By setting values for X3, X2, X1, X0, Y3, Y2, Y1, Y0 and Cin, observe the following signals: S3, S2, S1, S0and Cout. This ensures that two displays will show the signed sum.
3 Laboratory Work
The procedure is divided into two parts: Part A.
1. This part must be completed during the week 1 of this lab experiment.
2. Compile your modified 4-bit Adder/Subtractor unit (ASU) file ASU.vhd and create a symbol file ASU.bsf
3. Compile your seven segment code sseg.vhd as a separate project and create a symbol file sseg.bsf
4. Start a new Project CombinedASU1 and create a block schematic file CombineASU1.bdf.
5. Import the symbols ASU and sseg into the block schematic file CombinedASU1.bdf.
6. Complete the wiring and pin assignments by following the connections described inthe Figure 1 (Typical Schematic generated using Quartus II depicted in ).Table 1. . 4-bit Student ID generated by combinatorial logicFigure 1. Block Diagram for PART A implementation
Part B.
1. This part must be completed during the week 2 of this lab experiment.
2. Consider the 9 digits of the student identifier D = {d1, d2, d3, d4, d5, d6, d7, d8, d9} in its general representation. Write a table that represents each digit of your student ID in four bits. For example, if a student’s ID is: 111726015, it will likely follow a 4-bit sequence {0001, 0001, 0001, 0111,……, 0101} as depicted in Table 1. 3. Compile your customized Combinatorial Unit C.vhd and create a symbol file c.bsf
4. Start a new Project CombinedASU2 and create a block schematic file CombineASU2.bdf.Figure 2. Block Diagram for PART B implementation
5. Import the symbols ASU, combinatorial and sseg (refer Part A) into the block schematic file CombinedASU2.bdf.
6. Complete the wiring and pin assignments by following the connections described in the Figure 2 (Typical Schematic generated using Quartus II depicted in ).
Appendix AFigure 3. Typical Block schematic for PART A & B implementation using Quartus II