[SOLVED] Ecse 427/comp 310 – assignment 02 simple user-level thread scheduler
5.0
1 customer review
Digital download
Digital download
$25.00
- Availability
- In stock
- Checkout
- One item
Need a hand?
Message us on WhatsApp for payment or download support.
first-come-first-serve (FCFS) thread scheduler. The threading library will have two executors –
these are kernel-level threads that run the user-level threads. One executor is dedicated to running
compute tasks and the other executor is dedicated for input-output tasks.The user-level threads are responsible for running tasks. The tasks are C functions. Your threading
library is expected to at least run the tasks we provide as part of this assignment. A task is run by
the scheduler until it completes or yields. The tasks we provide here do not complete (i.e., they
have while (true) in their bodies). The only way a task can stop running once it is started is by
yielding the execution. A task calls sut_yield() for yielding (i.e., pausing) its execution. A task
that is yielding is put back in the task ready queue (at the end of the queue). Once the running task
is put back in the ready queue, the task at the front of the queue is selected to run next by the
scheduler.A newly created task is added to the end of the task ready queue. To create a task we use the
sut_create() function, which takes a C function as its sole argument. When the task gets to run
on the executor, the user supplied C function is executed.All tasks execute in a single process. Therefore, the tasks share the process’ memory. In this simple
user-level threading system, variables follow the C scoping rules in the tasks. You can make
variables local to a task by declaring them in the C function that forms the “main” of the task. The
global variables are accessible from all tasks.The sut_yield() pauses the execution of a thread until it is selected again by the scheduler. With
a FCFS scheduler the task being paused is put at the back of the queue. That means the task would
be picked again after running all other tasks that are ahead of it in the queue. We also have a way
of terminating a task’s execution by calling sut_exit(), which stops the execution of the current
task like sut_yield() but does not put it back into the task ready queue for further execution.So far, we described what happens with the compute tasks. The threading library has two executors
(i.e., kernel-level threads). One is dedicated for compute tasks and is responsible for carrying out
all that is described above. The other executor is dedicated for input-output (I/O). For instance, a
task would want to send a message to outside processes or receive data from outside processes.
This is problematic because input-output can be blocking. We have a problem when a user-level
thread blocks – the whole program would stall. To prevent this problem, we use a dedicated
executor for I/O. The idea is to offload the input and output operations to the I/O executor such
that the compute executor would not block.For instance, sut_read() would read data from an external process much like the read() you
would do on a socket. The sut_read() can stall (delay) the task until the data arrives. With userlevel threading, stalling the task is not a good idea. We want to receive the data without stalling
the executor with the following approach. When a task issues sut_read() we send the request to
a request queue and the task itself is put in a wait queue.When the response arrives, the task is
moved from the wait queue to the task ready queue and it would get to run in a future time. We
have sut_write() to write data to the remote process. However, the write is non-blocking. To
simplify the problem, we don’t even wait for an acknowledgement of the sent data. We copy the
data to be sent to local buffer and expect the I/O executor to reliably send it to the destination.Same way we also have sut_open() and expect the I/O executor to make the connection to the
remote process without error. Error conditions such as remote process not found is not willing to
accept connections are not handled. We assume all is good regarding the remote process and just
open the connection and move to the next statement.Overall Architecture of the SUT Library
The simple user-level threading (SUT) library that you are developing in this assignment has the
following major components.It has two kernel-level threads known as the executors. One of them is the compute executor (CEXEC) and the other is the I/O executor (I-EXEC). The C-EXEC is responsible for most the
activities in the SUT library. The I-EXEC is only taking care of the I/O operations. Creating the
two kernel-level threads to run C-EXEC and I-EXEC is the first action performed while initializing
the SUT library.The C-EXEC is directly responsible for creating tasks and launching them. Creating a task means
we need to create a task structure with the given C task-main function, stack, and the appropriate
values filled into the task structure. Once the task structure is created, it is inserted into the task
ready queue. The C-EXEC pulls the first task in the task ready queue and starts executing it. The
executing task can take three actions:1. Execute sut_yield(): this causes the C-EXEC to take over the control. That is the user
task’s context is saved in a task control block (TCB) and we load the context of C-EXEC
and start it. We also put the task in the back of the task ready queue.2. Execute sut_exit(): this causes the C-EXEC to take over the control like the above case.
The major difference is that TCB is not updated or the task inserted back into the task
ready queue.3. Execute sut_read(): this causes the C-EXEC to take over the control. We save the user
task’s context in a task control block (TCB) and we load the context of C-EXEC and start
it. We put the task in the back of the wait queue.When a task executes sut_open(), it sends a message to the I-EXEC by enqueuing the message
in the To-IO queue. The message will instruct the I-EXEC to open a connection to the specified
destination. In a subsequent statement, the task would issue sut_write() to write the data to the
destination process. We would not wait for confirmation from open or write as a way of
simplifying their implementations.The destination process we open for I/O is used by
sut_read() as well. Because we assume a single active remote process there is no need to pass a
connection handle like a file descriptor for the sut_read() or sut_write() call. We will have
a sut_close() terminate the connection we have established with the remote process.After the SUT library is done with the initializations, it will start creating the tasks and pushing
them into the task ready queue. Once the tasks are created, the SUT will pick a task from the task
ready queue and launch it. Some tasks can be launched at runtime by user tasks by calling the
sut_create() function.The task scheduler, which is a very simple scheme – just pick the task
at the front of the queue, might find that there are no tasks to run in the task ready queue. For
instance, the only task in the task ready queue could issue a read and go into the wait queue. To
reduce the CPU utilization the C-EXEC will go take a short sleep using the nanosleep command
in Linux (a sleep of 100 microseconds is appropriate). After the sleep, the C-EXEC will check the
task ready queue again.The I-EXEC is primarily responsible for reading the To-IO message queue and executing the
appropriate command. For instance, I-EXEC needs to open a connection to the remote process in
response to the sut_open() call. Similarly, it needs to process the sut_write() call as well.
With the sut_read() call, I-EXEC get the data and needs to put the data in the From-IO message
queue and transfer the task from the wait queue to the task ready queue. This transfer is done by
I-EXEC because the task does not need to wait any more. The data the task wanting to read has
arrived.The sut_shutdown() call is responsible for cleanly shutting down the thread library. We need to
keep the main thread waiting for the C-EXEC and I-EXEC threads and it one of the important
functions of sut_shutdown(). In addition, you can put any termination related actions into this
function and cleanly terminate the threading library.The SUT Library API and Usage
The SUT library will have the following API. You need to follow the given API so that testing can
be easy.
void sut_init();
bool sut_create(sut_task_f fn);
void sut_yield();
void sut_exit();
void sut_open(char *dest, int port);
void sut_write(char *buf, int size);
void sut_close();
Executor (C-EXEC)
Executor (I-EXE
C)
Task Ready
Queue
Wait
Queuechar *sut_read();
void sut_shutdown();Context Switching and Tasks
You can use the makecontext() and swapcontext() to manage the user-level thread creation,
switching, etc. The sample code provided in the YAUThreads package illustrates the use of the
user-level context management in Linux.Important Assumptions
Here are some important assumptions you can make in this assignment. If you want to make
additional assumptions, check with the TA-in-charge (Jason) or the professor.• The read and write tasks are launched by the application. We assume that there is only one
outstanding read/write at any given time. With the read API provided in SUT, we can have
multiple outstanding read calls. However, processing multiple outstanding read calls can
be complicated. Therefore, we assume only one read or write call could be pending at any
given time. That also means that the wait queue for I/O can have only one task at any given
time (do we actually need a queue?).• There are no interrupts in the user-level thread management to be implemented in this
assignment. A task that starts running only stops for the three reasons given in Section 2.
• You can use libraries for creating queues and other data structures – you don’t need to
implement them yourself! We have already given you some libraries for implementing data
structures.Grading
Your assignment will be evaluated in stages.
1. Only simple computing tasks. We spawn several simple tasks that just print messages and
yield. You need to get this working to demonstrate that you can create tasks and they can
cooperatively switch among them.2. Tasks that spawn other tasks. In this case, we have some tasks that spawn more tasks. In
total a bounded (not more than 15 tasks) will be created. You need to demonstrate that you
can have tasks creating other tasks at runtime.3. Tasks that have I/O in them. We have some tasks write to a remote server. We don’t mix
write and read, just one type – write from the tasks to an external server.4. Tasks that have I/O again. This time the tasks have read in them.